When low water pressure gets you down power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes household gardens farms commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor full stainless steel pump body cast iron ends 1.25a˜a™ inlet and 1a˜a™ outlet ports corrosion-resistant brass connectors efficient cooling system and not least built-in thermal protection. Pumping out at a rate of 200L/min with a 70m head the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis you can be assured of dependable and reliable water supply in more ways than one.
br>strong>Features:
/strong>Powerful 2500W self-priming multi-stage pumpbr> Garden irrigation farm irrigation and home water supplybr> 100% duty cycle - designed for continuous operationbr> Rust-resistant stainless steel pump body with cast iron endsbr> Fully automatic operation on/off controllerbr> Huge 70m headbr> Anti-corrosive alloy motor housing ceramic and carbon sealsbr> Built-in thermal protectionbr> Efficient cooling systembr> Highly conductive copper motorbr> Corrosion-resistant brass connectorbr> Leak proof rubber ringbr> Easy connecting plug and cablebr> Fully automatic pressure controllerbr> start-up pressurebr> Australian standard cable and plug
br>strong>Specifications:
/strong>Pump:br> MAX power: 2500W 3.5hpbr> Plug and cord: SAA 250V/10A *0.3mbr> Max pump flow: 12000L/h (200L/min)br> Max head: 70mbr> Duty cycle: Continuousbr> Impeller Stainless steelbr> Pump body: Stainless steelbr> Motor shaft: Stainless steelbr> Inlet diameter: 1.25'' (30mm)br> Outlet diameter: 1'' (25mm)br> Brass connector: 1''br> Protection class: IP44br> Insulation class: B (130A°C)br> Max ambient temperature: 40A°Cbr> Max liquid temperature: 60A°Cbr> Controller:br> Voltage: 220/240Vbr> Frequency: 50/60Hzbr> Maximum current: 10Abr> Maximum water temperature: 60A°Cbr> Maximum pressure for use: 10barbr> Protection grade: IP65br> Inlet and outlet size: 1a˜a™(25mm)br> Dimensions: 22cm x 12.4cm x 17cmbr> Colour: Yellow
br>strong>Package Contents:
/strong>Giantz 6-stage Water Pumpx 1br> Pump Controllerx 1br> User manualx1/p
