Your cart
Pu Foam Applicator Gun Polyurethane Metal Spray Expanding Insulation Bc 1506

Pu Foam Applicator Gun Polyurethane Metal Spray Expanding Insulation Bc 1506

$28.23

Heavy Metal Polyurethane FoamApplicator Ideal For Sealing Filling And Insulating Small Gaps. It Is A Heavy Duty Yet Lightweight And Compact Tool Ergonomically Designed To Use For Longer Periods.Easy ToUse And Has A Sprung Trigger To Accurately Control Flow.

Specifications

  • Model: Bc-1506
  • Polyurethane Foam Applicator G - un
  • Power Source: Manual
  • G - un Tube Material:ASteel WithACoating
  • G - un Body Material: Aluminum Alloy
  • G - un Trigger Material: Steel Trigger With Nickel Coated
  • G - un Adapter Material: Universal Zinc Alloy Adapter
  • G - un Needle Material Stainless Steel Sealing Needle
  • G - un Nozzle Material Brass
  • G - un Barrel Material: Steel With Nickel Coated
  • G - un Barrel Length:19 Cm
  • G - un Handle Material Environmental Pp Handle
  • G - un Adapter Finish Teflon Coated
  • Size:A750Ml 500Ml
  • G - un Dimensions: 32.5Cm (L)X 15Cm(W)
  • Tube Length: 18.5Cm
  • Nozzle Diameter: 2Mm
  • G - un End Nozzle:ABrass
  • G - un Colour:AStainless Steel Silver And Black

Features

  • Heavy Duty
  • Nickel Coated
  • Lightweight Yet Strong
  • Sprung Trigger Allows You To Accurately Control Flow
  • Fitting The Foam G - un Is Quick And Easy - Just Screw Onto Any G - un Grade Canister.
  • Using The G - un Is Easy Too Simply Pull The Trigger To Release A Controlled Flow Of Expanding Foam

Package

  • Comes Packed In A Cardboard Triangle Box.
  • 1 X Pu Foam Applicator G - un
  • 1 X plastic Tube
  • 2 X plastic Nozzlea

How To Use PuaFoam G - un

  1. Take A Can Of G - un Foam And Shake Vigorously.
  2. Screw Can On To Adapter Of G - un (Not Too Tight).
  3. Release The Flow Adjustment Screw Lightly And Dispense Foam Immediately To Fill The Entire G - un With Foam.
  4. The Foam G - un I Snow Ready To Use.
  5. Foam Output Can Be Controlled With Flow Adjustment Screw.

After Use Of The Foam G - un

  1. Leave G - un Filled With Foam After Use.Always Keep A Filled Can Of G - un Foam On The G - un.
  2. Tighten The Flow Adjustment Screw Completely.Do Not Empty The G - un. G - unn Must Always Be Filled With Foamotherwise Foam Is Cured Due To The Humidity In The Air.
  3. Put Can Away In A Vertical Position(G - un Upwards).

Use Foam G - un Again

  1. Shake The Can Vigorously(Keep Hold Of The G - un).
  2. Remove Cured Foam At The Tip Of The Nozzle Carefully With A Smallsharp Knife.
  3. Release The Flow Adjustment Screw Lightly And Dispense Foam Immediately Until The Flow Of Foam Is Correct.
  4. The G - un Is Now Ready To Use.
  5. Foam Output Can Be Controlled With Trigger Of The G - un.

Replacing Of The Can G - un Foam

  1. Check If The Can Is Empty By Dispensing Foam In A Dust-Bin Until No More Foam Is Released.
  2. Take A New Can Of G - un Foam.Shake Vigorously.
  3. Unscrew The Empty Can(Keep Valve Opening Away From You)Remove Released Foam From Adapter And Replace The Empty Can Immediately By A New One.
  4. Dispense Foam Immediately To Fill The Extension Tube.

Cleaning Of The Foam G - un At Times Of Interruption

  1. Unscrew The Can Of G - un Foam (Keep Valve Opening Away From You).
  2. Take A Can G - un Cleaner And Screw The Can On The G - un.
  3. Pull The Trigger Again To Refill The G - un With Cleaner.
  4. Cleaner Has To Remain In The G - un For About 5 Minutes.
  5. Pull The Trigger Again To Refill The G - un With Cleaner.
  6. Unscrew The Can G - un Cleaner.
  7. Screw The Can G - un Foam Onto The Gun.
  8. Pull Trigger Of The G - un Again Until Foam Is Released And Cleaner Completely Removed.
  9. The G - un Is Now Ready To Use.

Please note that if your postcode/suburb is rural your package will be dropped to your closest pick up location for collection