Your cart
Pu Foam Applicator G - Un Polyurethane Non-Stick Ptfe Coated Expanding Bc-1573

Pu Foam Applicator G - Un Polyurethane Non-Stick Ptfe Coated Expanding Bc-1573

$40.73

Polyurethane Foam Applicator Ideal For Sealing Filling And Insulating Small Gaps. It Is A Solid And Durable Lightweight And Compact Tool Ergonomically Designed To Use For Longer Periods.Easy To Clean And A Sprung Trigger To Accurately Control Flow.

Specifications

  • Model: Bc-1573
  • Polyurethane Foam Applicator Gun
  • Power Source:Manual
  • G - un Trigger Material:Steel With Non-Stick Ptfe Coating
  • G - un Tube Material:Steel With Non-Stick Ptfe Coating
  • Size:750Ml 500Ml
  • G - un Dimensions: 32.5Cm (L)X 20Cm(W)
  • Tube Length: 18.5Cm
  • Nozzle Diameter: 2Mm
  • G - un End Nozzle:Brass
  • G - un Colour: Black And Red

Features

  • Ergonomic Design
  • Double Colour Rubber Handle
  • Non-Stick Ptfecoated For Easy Non Scratch Cleaning.
  • Corrosion And Wear Resistant
  • Sprung Control Trigger

Package

  • Comes Packed In A Cardboard Triangle Box.
  • 1 X Pu Foam Applicator Gun
  • 1 X Plastic Tube
  • 2 X Plastic Nozzle

Directions For Use Of The Foam Gun

  1. Take A Can Of G - un Foam And Shake Vigorously.
  2. Screw Can On To Adapter Of G - un(Not Too Tight).
  3. Release The Flow Adjustment Screw Lightly And Dispense Foam Immediately To Fill The Entire Gun With Foam.
  4. The Foam G - un I Snow Ready To Use.
  5. Foam Output Can Be Controlled With Flow Adjustment Screw.
After Use Of The Foam Gun
  1. Leave Gun Filled With Foam After Use.Always Keep A Filled Can Of Gun Foam On The Gun.
  2. Tighten The Flow Adjustment Screw Completely.Do Not Empty The G - un.G - un Must Always Be Filled With Foamotherwise Foam Is Cured Due To The Humidity In The Air.
  3. Put Can Away In A Vertical Position(Gun Upwards).
Use Foam Gun Again
  1. Shake The Can Vigorously(Keep Hold Of The G - un).
  2. Remove Cured Foam At The Tip Of The Nozzle Carefully With A Smallsharp Knife.
  3. Release The Flow Adjustment Screw Lightly And Dispense Foam Immediately Until The Flow Of Foam Is Correct.
  4. The G - un Is Now Ready To Use.
  5. Foam Output Can Be Controlled With Trigger Of The G - un.
Replacing Of The Can G - un Foam

  1. Check If The Can Is Empty By Dispensing Foam In A Dust-Bin Until No More Foam Is Released.
  2. Take A New Can Of G - un Foam.Shake Vigorously.
  3. Unscrew The Empty Can(Keep Valve Opening Away From You)Remove Released Foam From Adapter And Replace The Empty Can Immediately By A New One.
  4. Dispense Foam Immediately To Fill The Extension Tube.

Cleaning Of The Foam G - un At Times Of Interruption

  1. Unscrew The Can Of G - un Foam (Keep Valve Opening Away From You).
  2. Take A Can G - un Cleaner And Screw The Can On The Gun.
  3. Pull The Trigger Again To Refill The G - un With Cleaner.
  4. Cleaner Has To Remain In The G - un For About 5 Minutes.
  5. Pull The Trigger Again To Refill The G - un With Cleaner.
  6. Unscrew The Can G - un Cleaner.
  7. Screw The Can Gun Foam Onto The Gun.
  8. Pull Trigger Of The G - un Again Until Foam Is Released And Cleaner Completely Removed.
  9. The G - un Is Now Ready To Use.