Ul>
Li>A€6 Measurement Functionsa€‘: One Interface Simultaneously Displays 6 Measurement Parameters Including Voltage (Ac 80-260V) Current (0-100A) Power (0-22000W) Energy Consumption (0-999Kwh) Frequency (45-65Hz) Power Factor (0-1Pf)
Li>A€Backlight Controla€‘: The Backlight Can Be Turned On Or Off By Short Pressing The Button And The Data Can Be Saved Automatically When The Backlight Is Off
Li>A€Alarm Functiona€‘: You Can Set The Current Alarm Threshold
/Ul>
P>When The Backlight Flashes It Means The Current Power Is Higher Than The Overload Power To Warn The Overload.
P>When The Current Power Is Lower Than The Overload Power The Alarm Will Stop.
P>At The Same Time The Battery Warning Threshold Can Also Be Preset.
Ul>
Li>A€Power Button Reset Functiona€‘: Step 1: Press And Hold The Button For 5 Seconds Until The Power Number Flashes Then Release The Button
Li>Step 2: Short Press The Button Again To Clear The Battery Data And Exit The Flashing State
Li>Step 3: If There Is No Key Operation Within 5 Seconds It Means The Performance Data Is Not Cleared And It Exits The Reset State
Li>A€Wide Applicationa€‘: Widely Used In Household Appliances Solar Energy Systems Industrial Assembly Lines Etc.
/Ul>
